SWAGED ORFS FITTINGS
SWAGED ORFS FITTINGS
14211 ORFS MALE O-RING SEAL
SAE J516 standard thread;
Male connection port;
O-Ring Flat Surface Seat Seal;
Straight body elbow;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 14211 for braid; 14212 for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | O RING | DIMENSIONS | |||
|---|---|---|---|---|---|---|---|
| DN | DASH | A | C | S1 | |||
| 14211-04--04 | 9/16"x18 | 6 | 04 | O011 | 22.5 | 9.8 | 17 |
| 14211-06-04 | 11/16"x16 | 6 | 04 | O012 | 24 | 11.2 | 19 |
| 14211-06-06 | 11/16"x16 | 10 | 06 | O012 | 24 | 11.2 | 19 |
| 14211-08-06 | 13/16"x16 | 10 | 06 | O014 | 27.5 | 12.8 | 22 |
| 14211-08-08 | 13/16"x16 | 12 | 08 | O014 | 28.5 | 12.8 | 22 |
| 14211-08-10 | 13/16"x16 | 16 | 10 | O014 | 28.5 | 12.8 | 22 |
| 14211-10-08 | 1"x14 | 12 | 08 | O016 | 32.5 | 15.5 | 27 |
| 14211-10-10 | 1"x14 | 16 | 10 | O016 | 33.5 | 15.5 | 27 |
| 14211-12-08 | 1.3/16"x12 | 12 | 08 | O018 | 35.5 | 17 | 32 |
| 14211-12-10 | 1.3/16"x12 | 16 | 10 | O018 | 36 | 17 | 32 |
| 14211-12-12 | 1.3/16"x12 | 20 | 12 | O018 | 36.5 | 17 | 32 |
| 14211-16-12 | 1.7/16"x12 | 20 | 12 | O021 | 37 | 17.5 | 38 |
| 14211-16-16 | 1.7/16"x12 | 25 | 16 | O021 | 38.5 | 17.5 | 38 |
| 14211-20-20 | 1.11/16"x12 | 32 | 20 | O025 | 41.5 | 17.5 | 46 |
| 14211-24-24 | 2"x12 | 40 | 24 | O029 | 46.5 | 17.5 | 55 |
24211 ORFS FEMALE FLAT SEAT
SAE J516 standard thread;
Female connection port;
O-Ring Flat Surface Seat Seal;
Straight body elbow;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 24211 for braid; 24212 for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | |||
|---|---|---|---|---|---|---|
| DN | DASH | A | C | S1 | ||
| 24211-04-04 | 9/16"x18 | 6 | 04 | 22.5 | 8.5 | 19 |
| 24211-04-05 | 9/16"x18 | 8 | 05 | 22.5 | 8.5 | 19 |
| 24211-04-06 | 9/16"x18 | 10 | 06 | 22.5 | 8.5 | 19 |
| 24211-06-04T | 11/16"x16 | 6 | 04 | 23.5 | 10 | 22 |
| 24211-06-05T | 11/16"x16 | 8 | 05 | 23.5 | 10 | 22 |
| 24211-06-06 | 11/16"x16 | 10 | 06 | 25.5 | 10 | 22 |
| 24211-06-08 | 11/16"x16 | 12 | 08 | 26 | 10 | 22 |
| 24211-08-05T | 13/16"x16 | 8 | 05 | 25 | 11 | 27 |
| 24211-08-06T | 13/16"x16 | 10 | 06 | 25 | 11 | 27 |
| 24211-08-08 | 13/16"x16 | 12 | 08 | 28 | 11 | 27 |
| 24211-08-10 | 13/16"x16 | 16 | 10 | 29 | 11 | 27 |
| 24211-10-08T | 1"x14 | 12 | 08 | 29.5 | 13.5 | 30 |
| 24211-10-10 | 1"x14 | 16 | 10 | 33 | 13.5 | 30 |
| 24211-10-12 | 1"x14 | 20 | 12 | 33.5 | 13.5 | 30 |
| 24211-12-08T | 1.3/16"x12 | 12 | 08 | 30.5 | 15 | 36 |
| 24211-12-10T | 1.3/16"x12 | 16 | 10 | 31.5 | 15 | 36 |
| 24211-12-12 | 1.3/16"x12 | 20 | 12 | 35 | 15 | 36 |
| 24211-12-16 | 1.3/16"x12 | 25 | 16 | 36 | 15 | 36 |
| 24211-16-12T | 1.7/16"x12 | 20 | 12 | 35 | 14.8 | 41 |
| 24211-16-14T | 1.7/16"x12 | 22 | 16 | 35 | 14.8 | 41 |
| 24211-16-16T | 1.7/16"x12 | 25 | 35 | 14.8 | 41 | |
| 24211-16-20 | 1.7/16"x12 | 32 | 20 | 39.5 | 14.8 | 41 |
| 24211-20-16T | 1.11/16"x12 | 25 | 16 | 35 | 15 | 50 |
| 24211-20-20W | 1.11/16"x12 | 32 | 20 | 42.5 | 15 | 50 |
| 24211-20-24W | 1.11/16"x12 | 40 | 24 | 42.5 | 15 | 50 |
| 24211-24-20T | 2"x12 | 32 | 20 | 36 | 14.8 | 60 |
| 24211-24-24T | 2"x12 | 40 | 24 | 36 | 14.8 | 60 |
24241 45 °ORFS FEMALE FLAT SEAT
SAE J516 standard thread;
Female connection port;
O-Ring Flat Surface Seat Seal;
45° body elbow;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 24241 for braid; 24242 for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | ||||
|---|---|---|---|---|---|---|---|
| DN | DASH | A | H | C | S2 | ||
| 24241-04-04 | 9/16"x18 | 6 | 04 | 45.5 | 23.4 | 8.5 | 19 |
| 24241-04-05 | 9/16"x18 | 8 | 05 | 47.6 | 24.3 | 8.5 | 19 |
| 24241-04-06 | 9/16"x18 | 10 | 06 | 49.2 | 24.9 | 8.5 | 19 |
| 24241-06-04T | 11/16"x18 | 6 | 04 | 39.5 | 17.4 | 10 | 22 |
| 24241-06-05T | 11/16"x18 | 8 | 05 | 42.3 | 19 | 10 | 22 |
| 24241-06-06 | 11/16"x18 | 10 | 06 | 51.3 | 27.1 | 10 | 22 |
| 24241-08-06T | 13/16"x16 | 10 | 06 | 44.6 | 20.3 | 11 | 27 |
| 24241-08-08 | 13/16"x16 | 12 | 08 | 65.7 | 30.7 | 11 | 27 |
| 24241-08-10 | 13/16"x16 | 16 | 10 | 76.5 | 31.7 | 11 | 27 |
| 24241-10-08T | 1"x14 | 12 | 08 | 58.2 | 23.3 | 13.5 | 30 |
| 24241-10-10 | 1"x14 | 16 | 10 | 79.2 | 34.9 | 13.5 | 30 |
| 24241-12-08T | 1.3/16"x12 | 12 | 08 | 58.2 | 23.3 | 15 | 36 |
| 24241-12-10T | 1.3/16"x12 | 16 | 10 | 68.2 | 23.9 | 15 | 36 |
| 24241-12-12 | 1.3/16"x12 | 20 | 12 | 87 | 39.5 | 15 | 36 |
| 24241-12-16 | 1.3/16"x12 | 25 | 16 | 95.3 | 41 | 15 | 36 |
| 24241-16-12T | 1.7/16"x12 | 20 | 12 | 74 | 29.6 | 14.8 | 41 |
| 24241-16-14T | 1.7/16"x12 | 22 | 14 | 78.7 | 28.5 | 14.8 | 41 |
| 24241-16-16T | 1.7/16"x12 | 25 | 16 | 84.1 | 29.7 | 14.8 | 41 |
| 24241-20-16T | 1.11/16"x12 | 25 | 16 | 84.1 | 29.7 | 15 | 50 |
| 24241-20-20W | 1.11/16"x12 | 32 | 20 | 111.2 | 49 | 15 | 50 |
| 24241-24-20T | 2"x12 | 32 | 20 | 94.5 | 33.8 | 14.8 | 60 |
| 24241-24-24T | 2"x12 | 40 | 24 | 108.5 | 37.7 | 14.8 | 60 |
24291 90 °ORFS FEMALE FLAT SEAT
SAE J516 standard thread;
Female connection port;
O-Ring Flat Surface Seat Seal;
90° body elbow;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 24291 for braid; 24292 for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | ||||
|---|---|---|---|---|---|---|---|
| DN | DASH | A | H | C | S2 | ||
| 24291-04-04 | 9/16"x18 | 6 | 04 | 30 | 41 | 8.5 | 19 |
| 24291-04-05 | 9/16"x18 | 8 | 05 | 33 | 44 | 8.5 | 19 |
| 24291-06-05T | 11/16"x16 | 8 | 05 | 33 | 37.5 | 10 | 22 |
| 24291-06-06 | 11/16"x16 | 10 | 06 | 35.3 | 49.3 | 10 | 22 |
| 24291-06-08 | 11/16"x16 | 12 | 08 | 41 | 55 | 10 | 22 |
| 24291-08-06T | 13/16"x16 | 10 | 06 | 35.3 | 39.8 | 11 | 27 |
| 24291-08-08 | 13/16"x16 | 12 | 08 | 41 | 57.5 | 11 | 27 |
| 24291-08-10 | 13/16"x16 | 16 | 10 | 56.5 | 61.5 | 11 | 27 |
| 24291-10-08T | 1"x14 | 12 | 08 | 41 | 46 | 13.5 | 30 |
| 24291-10-10 | 1"x14 | 16 | 10 | 56 | 66 | 13.5 | 30 |
| 24291-10-12 | 1"x14 | 20 | 12 | 65.5 | 75.5 | 13.5 | 30 |
| 24291-12-10T | 1.3/16"x12 | 16 | 10 | 56 | 51.5 | 15 | 36 |
| 24291-12-12 | 1.3/16"x12 | 20 | 12 | 65.5 | 77 | 15 | 36 |
| 24291-12-16 | 1.3/16"x12 | 25 | 16 | 76.7 | 83.5 | 15 | 36 |
| 24291-16-12T | 1.7/16"x12 | 20 | 12 | 65.5 | 63 | 14.8 | 41 |
| 24291-16-14T | 1.7/16"x12 | 22 | 14 | 71.2 | 63 | 14.8 | 41 |
| 24291-16-16T | 1.7/16"x12 | 25 | 16 | 76.9 | 67.5 | 14.8 | 41 |
| 24291-20-16T | 1.11/16"x12 | 25 | 16 | 76.7 | 67.5 | 15 | 50 |
| 24291-20-20W | 1.11/16"x12 | 32 | 20 | 93 | 100 | 15 | 50 |
| 24291-24-20T | 2"X12 | 32 | 20 | 91.5 | 78.5 | 14.8 | 60 |
| 24291-24-24T | 2"X12 | 40 | 24 | 109.4 | 92 | 14.8 | 60 |
Related Products
Swaged NPT Fittings
Swaged NPT fittings refers to the fittings that have National Pipe Tapered thread, which can mate stright thread for seal, here male port offered with 60° chamfer.
Swaged SAE O-Ring Seal Fittings
Swaged SAE O-Ring seal Fittings refers to male hydraulic fittings which have a o-ring seal at the root of the thread, either in the groove or on the boss seat.
Swaged JIC 74 Cone Seal Fittings
Swaged JIC 74 cone seal fittings refer to a 74 flared seat on the male thread and a 74 inverted flare on the female mandrel，they have JIC type thread confrom to SAE J514 standard.
Swaged SAE 90 Cone Seal Fittings
Swaged SAE 90 cone seal fittings refer to a 90° flared seat on the top of male thread, and a 90° inverted flare on the female mandrel. the thread type conform to SAE J512
Swaged NPSM Fittings
Swaged NPSM fittings haw npsm standard thread, that is a straight thread (not tapered), they have 60° cone seat on the female mandrel, swaged tail, widely used in the North America.
Swaged SAE Flange 3000 Fittings
Swaged SAE Flange 3000 Fittings have flange connectiong port which comply with SAE standard, the working pressure the fitting endure is 3000 PSI, and with swaged tail.
Swaged SAE Flange 6000 Fittings
Swaged SAE Flange 6000 Fittings have flange connectiong port which comply with SAE standard, the working pressure the fitting endure is 6000 PSI, and with swaged tail.