Swaged JIC 74 Cone Seal Fittings

Seal    type:   74° inverted flare on the female fittings;  mated   74° flare seat on the  male fittings;

Thread type:   SAE J514 thread standard;

Tail       type:  swaged; mated with corresponding ferrule to be crimped;

       Material:  Zinc plated carbon steel; stainless steel available;

swaged JIC 74 cone seal fittings
swaged JIC 74 cone seal fittings

16711 JIC MALE 74° CONE SEAT

Description:

Seal    type:   74° flare seat on the  male fittings;

Thread type:   SAE J514 thread standard;

Tail       type:  swaged; mated with corresponding ferrule to be crimped;

       Material:  Zinc plated carbon steel; stainless steel available;

Note: 

            The last number in the five item code:  “1” stands for use with braided hoses; “2” stands for use with                           spiral hoses; e.g 16711 for braid; 16712 for spiral;

Featured image:

Tech Specification:

PART NO.THREAD EHOSE BOREDIMENSIONS
DNDASHACS1
16711-04-037/16"x20503261412
16711-04-047/16"x2060426.51412
16711-05-041/2"x2060426.51414
16711-05-051/2"x2080526.51414
16711-05-061/2"x20100626.51417
16711-06-049/16"x1860426.514.117
16711-06-059/16"x1880526.514.117
16711-06-069/16"x18100626.514.117
16711-08-063/4"x16100631.516.722
16711-08-083/4"x1612083216.722
16711-10-067/8"X14100633.519.324
16711-10-087/8"X1412083419.324
16711-10-107/8"X1416103519.324
16711-12-081.1/16"x12120838.521.930
16711-12-101.1/16"x12161039.521.930
16711-12-121.1/16"x1220124021.930
16711-12-161.1/16"x1225164221.930
16711-14-101.3/16"x12161041.522.632
16711-14-121.3/16"x12201240.522.632
16711-16-121.5/16"x1220124323.136
16711-16-161.5/16"x12251643.523.136
16711-20-161.5/8"x1225164724.346
16711-20-201.5/8"x12322047.524.346
16711-24-201.7/8"x1232205327.550
16711-24-241.7/8"x1240245327.550
16711-32-321.1/2"x1250326233.965

16711L JIC MALE 74° CONE

Description:

Seal    type:   74° flare seat on the  male fittings;

Thread type:   SAE J514 thread standard;

Tail       type:  swaged; mated with corresponding ferrule to be crimped;

       Material:  Zinc plated carbon steel; stainless steel available;

Note: 

            The last number in the five item code:  “1” stands for use with braided hoses; “2” stands for use with                           spiral hoses; e.g 16711 for braid; 16712 for spiral;

Featured image:

Tech Specification:

PART NO.THREAD EHOSE BOREDIMENSIONS
DNDASHACS1
16711L-04-047/16"x206044330.517
16711L-05-041/2"x206044330.519
16711L-05-051/2"x208054330.519
16711L-06-049/16"x186044732.522
16711L-06-059/16"x188054732.522
16711L-06-069/16"x1810064732.522
16711L-08-063/4"x1610065136.524
16711L-08-083/4"x16120851.536.524
16711L-10-067/8"x14100656.54030
16711L-10-087/8"x141208574030
16711L-10-107/8"x141610584030
16711L-12-081.1/16"x1212086344.536
16711L-12-101.1/16"x1216106444.536
16711L-12-121.1/16"x1220126444.536
16711L-16-121.5/16"x1220126644.541
16711L-16-161.5/16"x1225166744.541
16711L-20-161.5/8"x12251670.545.750
16711L-20-201.5/8"x12322071.245.750
16711L-24-201.7/8"x12322071.54655
16711L-24-241.7/8"x12402471.54655

26711 JIC FEMALE 74° CONE SEAT

Description:

Seal    type:   74° inverted flare on the female fittings;  mated   74° flare seat on the  male fittings;

Thread type:   SAE J514 thread standard;

Tail       type:  swaged; mated with corresponding ferrule to be crimped;

       Material:  Zinc plated carbon steel; stainless steel available;

Body    Angle: Straight;

 Note:  

           1. The last number in the five item code:  “1” stands for use with braided hoses; “2” stands for use with                           spiral hoses; e.g 20141 for braid; 20142 for spiral;

           2.  Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be                                     extracted out from the mandrel;

 

Featured image:

Tech Specification:

PART NO.THREAD EHOSE BOREDIMENSIONS
DNDASHACS1
26711-04-037/16"x2050314.5915
26711-04-047/16"x2060415915
26711-05-041/2"x20604169.517
26711-05-051/2"x20805169.517
26711-05-061/2"x20100616.59.517
26711-06-049/16"x1860416.510.519
26711-06-059/16"x188051610.519
26711-06-069/16"x18100616.510.519
26711-06-089/16"x1812081610.519
26711-08-063/4"x161006181124
26711-08-083/4"x16120818.51124
26711-08-103/4"x16161019.51124
26711-10-087/8"x14120819.51327
26711-10-107/8"x14161020.51327
26711-10-127/8"x14201220137
26711-12-08T1.1/16"x121208191532
26711-12-101.1/16"x12161021.51532
26711-12-121.1/16"x12201221.51532
26711-12-161.1/16"x12251623.51532
26711-14-121.3/16"x12201221.51536
26711-16-12T1.5/16"x12201218.51641
26711-16-161.5/16"x12251624.51641
26711-16-201.5/16"x123220241641
26711-20-16T1.5/8"x122516231750
26711-20-20W1.5/8"x123220261750
26711-24-20W1.7/8"x12322026.52055
26711-24-24W1.7/8"x12402426.52055
26711-32-24T2.1/2"x1240242723.575
26711-32-32T2.1/2"x1250322723.575

26711D JIC FEMALE 74° CONE SEAT DOUBLE HEXAGON

Description:

Seal    type:   74° inverted flare on the female fittings;  mated   74° flare seat on the  male fittings;

Thread type:   SAE J514 thread standard;

Tail       type:  swaged; mated with corresponding ferrule to be crimped;

       Material:  Zinc plated carbon steel; stainless steel available;

Body    Angle: Straight;

 Note:  

           1. The last number in the five item code:  “1” stands for use with braided hoses; “2” stands for use with                           spiral hoses; e.g 26711 for braid; 26712 for spiral;

           2.  Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be                                     extracted out from the mandrel;

            3. Item code with “D” means double nut on the female fittings.

Featured image:

Tech Specification:

PART NO.THREAD EHOSE BOREDIMENSIONS
DNDASHACS1S2
26711D-04-047/16"x206042091715
26711D-05-041/2"x20604219.51717
26711D-06-049/16"x186042110.51919
26711D-06-069/16"x1810062110.51919
26711D-08-063/4"x16100625112424
26711D-08-083/4"x16120824.5112424
26711D-08-103/4"x16161025.5112424
26711D-10-087/8"x14120828132727
26711D-10-107/8"x14161029132727
26711D-12-121.1/16"x12201231.5153232
26711D-16-121.5/16"x12201233.5164141
26711D-16-161.5/16"x12251634.5164141
26711D-16-201.5/16"x12322036.5164141
26711D-20-20W1.7/16"x12322041175050

26711D-SM JIC FEMALE 74° CONE SEAT DOUBLE HEXAGON

Description:

Seal    type:   74° inverted flare on the female fittings;  mated   74° flare seat on the  male fittings;

Thread type:   SAE J514 thread standard;

Tail       type:  swaged; mated with corresponding ferrule to be crimped;

       Material:  Zinc plated carbon steel; stainless steel available;

Body    Angle: Straight;

 Note:  

           1. The last number in the five item code:  “1” stands for use with braided hoses; “2” stands for use with                           spiral hoses; e.g 26711 for braid; 26712 for spiral;

           2.  Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be                                     extracted out from the mandrel;

            3. Item code with “D” means double nut on the female fittings.

Featured image:

Tech Specification:

PART NO.THREAD EHOSE BOREDIMENSIONS
DNDASHACS1S2
26711D-04-04SM7/16"x206042091215
26711D-05-04SM1/2"x2060420.59.51217
26711D-06-04SM9/16"X186042110.51419
26711D-06-06SM9/16"X1810062110.51719
26711D-08-06SM3/4"x16100623111924
26711D-08-08SM3/4"x16120824.5112224
26711D-08-10SM3/4"x16161025.5112224
26711D-10-08SM7/8"x14120826132227
26711D-10-10SM7/8"x14161027132227
26711D-12-12SM1.1/16"x12201231.5152732
26711D-16-12SM1.5/16"x12201231.5163241
26711D-16-16SM1.5/16"x12251633163241
26711D-20-20WSM1.7/16"x12322039174150

26741 45° JIC MALE 74° CONE SEAT

Description:

Seal    type:   74° inverted flare on the female fittings;  mated   74° flare seat on the  male fittings;

Thread type:   SAE J514 thread standard;

Tail       type:  swaged; mated with corresponding ferrule to be crimped;

       Material:  Zinc plated carbon steel; stainless steel available;

Body    Angle: 45°;

 Note:  

           1. The last number in the five item code:  “1” stands for use with braided hoses; “2” stands for use with                           spiral hoses; e.g 26741 for braid; 26742 for spiral;

           2.  Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be                                     extracted out from the mandrel;

Featured image:

Tech Specification:

PART NO.THREAD EHOSE BOREDIMENSIONS
DNDASHACHS2
26741-04-037/16"x2050337.6917.215
26741-04-047/16"x2060440.2918.115
26741-05-041/2"x2060440.59.518.517
26741-05-051/2"x2080542.79.519.317
26741-05-061/2"x20100644.69.520.317
26741-06-049/16"x1860440.510.518.519
26741-06-059/16"x1880542.610.519.319
26741-06-069/16"x18100644.310.52019
26741-08-063/4"x16100645.71121.424
26741-08-083/4"x16120857.91122.924
26741-10-087/8"x14120858.9132427
26741-10-107/8"x14161069.61325.327
26741-10-127/8"x14201275.71328.927
26741-12-081.1/16"x121208601525.132
26741-12-101.1/16"x12161070.71526.432
26741-12-121.1/16"x12201276.8153032
26741-14-121.3/16"x12201277.4153036
26741-16-121.5/16"x12201277.4163041
26741-16-161.5/16"x12251685.71631.541
26741-20-20W1.5/8"x12322095.91735.250
26741-24-20W1.7/8"x123220100.92040.155
26741-24-24W1.7/8"x124024114.82044.155
26741-32-32W2.1/2"x125032135.923.551.675

26791 90° JIC FEMALE 74° CONE SEAT

Description:

Seal    type:   74° inverted flare on the female fittings;  mated   74° flare seat on the  male fittings;

Thread type:   SAE J514 thread standard;

Tail       type:  swaged; mated with corresponding ferrule to be crimped;

       Material:  Zinc plated carbon steel; stainless steel available;

Body    Angle: 90°;

 Note:  

           1. The last number in the five item code:  “1” stands for use with braided hoses; “2” stands for use with                           spiral hoses; e.g 26791 for braid; 26792 for spiral;

           2.  Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be                                     extracted out from the mandrel;

            3. Item code with “W” means the nut has a little hose to penetrate transware against loosening.

Featured image:

Tech Specification:

PART NO.THREAD EHOSE BOREDIMENSIONS
DNDASHACHS2
26791-04-037/16"x2050326.5930.515
26791-04-047/16"x2060430933.515
26791-05-041/2"x20604309.53417
26791-05-051/2"x20805339.53717
26791-05-061/2"x20100635.310.539.317
26791-06-049/16"x186043010.53419
26791-06-059/16"x188053010.53719
26791-06-069/16"x18100635.310.539.319
26791-06-089/16"x18120835.81139.819
26791-08-063/4"x16100635.31141.324
26791-08-083/4"x161208411147.524
26791-08-103/4"x161610491347.524
26791-10-087/8"x14120841134827
26791-10-107/8"x141610561352.527
26791-10-127/8"x14201264.9156227
26791-12-081.1/16'x121208411549.532
26791-12-101.1/16'x12161056155432
26791-12-121.1/16'x12201265.51563.532
26791-12-161.1/16'x1225741563.532
26791-14-121.3/16'x12201665.51563.536
26791-16-121.5/16'x12201265.51663.541
26791-16-161.5/16'x12251676.7167041
26791-20-20W1.5/8"x12322091.51780.550
26791-24-20W1.7/8"x12322091.52080.555
26791-24-24W1.7/8"x124024109.4209455
26791-32-32W2.1/2"x125032133.123.5121.875

26791-H 90° JIC FEMALE 74° CONE SEAT

Description:

Seal    type:   74° inverted flare on the female fittings;  mated   74° flare seat on the  male fittings;

Thread type:   SAE J514 thread standard;

Tail       type:  swaged; mated with corresponding ferrule to be crimped;

       Material:  Zinc plated carbon steel; stainless steel available;

Body    Angle: 90°;

 Note:  

           1. The last number in the five item code:  “1” stands for use with braided hoses; “2” stands for use with                           spiral hoses; e.g 26791 for braid; 26792 for spiral;

Featured image:

Tech Specification:

PART NO.THREAD EHOSE BOREDIMENSIONS
DNDASHACHS2
26791-06-04(H66)9/16"x186043010.56619
26791-08-06(H78)3/4"x16100635.3117824
26791-10-08(H86)7/8"x14120841138627
26791-12-12(H135)1.1/16"x12201265.51513532
26791-16-16(H140)1.5/16"x12251676.71614041

26791K 90° JIC COMPACT FEMALE 74° CONE SEAT

Description:

Seal    type:   74° inverted flare on the female fittings;  mated   74° flare seat on the  male fittings;

Thread type:   SAE J514 thread standard;

Tail       type:  swaged; mated with corresponding ferrule to be crimped;

       Material:  Zinc plated carbon steel; stainless steel available;

Body    Angle: 90°;

 Note:  

           1. The last number in the five item code:  “1” stands for use with braided hoses; “2” stands for use with                           spiral hoses; e.g 26791 for braid; 26792 for spiral;

Featured image:

Tech Specification:

PART NO.THREAD EHOSE BOREDIMENSIONS
DNDASHACHS1S2
26791K-04-047/16"x2060417.59181115
26791K-06-049/16"x186042010.520.51419
26791K-06-069/16"x1810062010.520.51619
26791K-08-063/4"x1610062311251924
26791K-08-083/4"x16120823.511252224
26791K-10-087/8"x1412082513272227
26791K-10-107/8"x1416102513272227
26791K-12-121.1/16"x1220122915312732
26791K-16-161.5/16"x122516431634.33341
Feel Free to Contact us

    Related Products

    swaged npt fittings

    Swaged NPT Fittings

    Swaged NPT fittings refers to the fittings that have National Pipe Tapered thread, which can mate stright thread for seal, here male port offered with 60° chamfer.

    SAE O Ring Seal Male Fittings

    Swaged SAE O-Ring Seal Fittings

    Swaged SAE O-Ring seal Fittings refers to male hydraulic fittings which have a o-ring seal at the root of the thread, either in the groove or on the boss seat.

    swaged JIC 74 cone seal fittings

    Swaged SAE 90 Cone Seal Fittings

    Swaged SAE 90 cone seal fittings refer to a 90° flared seat on the top of male thread, and a 90° inverted flare on the female mandrel. the thread type conform to SAE J512

    swaged orfs fittings

    Swaged ORFS Fittings

    Swaged ORFS fittings have O-Ring Flat Seal interface when male thread matches female thread, an O-Ring in the groove of the male thread and an flat seat on the female mandrel.

    swaged npsm 60 cone seal fittings

    Swaged NPSM Fittings

    Swaged NPSM fittings haw npsm standard thread, that is a straight thread (not tapered), they have 60° cone seat on the female mandrel, swaged tail, widely used in the North America.

    swaged SAE flange fittings

    Swaged SAE Flange 3000 Fittings

    Swaged SAE Flange 3000 Fittings have flange connectiong port which comply with SAE standard, the working pressure the fitting endure is 3000 PSI, and with swaged tail.

    swaged SAE flange fittings

    Swaged SAE Flange 6000 Fittings

    Swaged SAE Flange 6000 Fittings have flange connectiong port which comply with SAE standard, the working pressure the fitting endure is 6000 PSI, and with swaged tail.