Swaged SAE Flange 6000 fittings

87611 SAE FLANGE 6000 PSI

6000 PSI working pressure flange;

 Two halves flange with an O Ring Seal ;

Straight body elbow;

Zinc-plated carbon steel; stainless steel available;

Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.

Note:

The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 87611 for braid; 87612 for spiral;

Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;

PART NO.THREAD EHOSE BOREDIMENSIONS
#colspan#
DNDASHACDL
87611-32-242"40248579.46712.57
87611-32-322"50328579.46712.57
87611-24-201.1/2"32207563.55112.57
87611-24-241.1/2"40247563.55112.57
87611-20-161.1/4"251665544410.29
87611-20-201.1/4"322066544410.29
87611-16-121"20125647.6389.53
87611-16-161"25165747.6389.53
87611-16-201"32206147.6389.53
87611-12-103/4"161050.541.3328.76
87611-12-123/4"20125141.3328.76
87611-08-081/2"12084731.7247.75

87631 30 ° SAE FLANGE 6000 PSI

6000 PSI working pressure flange;

 Two halves flange with an O Ring Seal ;

30° body elbow;

Zinc-plated carbon steel; stainless steel available;

Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.

Note:

The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 87631 for braid; 87632 for spiral;

Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;

PART NO.THREAD EHOSE BOREO RINGDIMENSIONS
DNDASHACDHL
87631-08-081/2"120818.64x3.5331.723.915.77.9
87631-12-123/4"201224.99x3.5341.331.719.88.9
87631-16-121"201232.92x3.5347.6389.6
87631-16-161"251632.92x3.5347.63820.89.6
87631-16-201"322032.92x3.5347.6389.6
87631-20-161.1/4"251637.69x3.535443.610.4
87631-20-201.1/4"322037.69x3.535443.62410.4
87631-24-201.1/2"322047.22x3.5363.550.825.512.7
87631-24-241.1/2"402447.22x3.5363.550.827.312.7
87631-32-242"402456.74x3.5379.466.527.312.7
87631-32-322"503256.74x3.5379.466.531.212.7

87641 45° SAE FLANGE 6000 PSI

6000 PSI working pressure flange;

 Two halves flange with an O Ring Seal ;

45° body elbow;

Zinc-plated carbon steel; stainless steel available;

Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.

Note:

The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 87641 for braid; 87642 for spiral;

Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;

PART NO.THREAD EHOSE BOREDIMENSIONS
DNDASHACDHL
87641-08-081/2"120858.931.724247.75
87641-08-121/2"20127731.72429.67.75
87641-12-103/4"161072.541.33228.28.76
87641-12-123/4"201279.241.33231.88.76
87641-16-161"251688.947.63834.79.53
87641-20-201.1/4"3220102.3544441.510.29
87641-24-201.1/2"3220105.863.55145.112.57
87641-24-241.1/2"4024119.863.5514912.57
87641-32-242"4024125.479.46754.712.57
87641-32-322"5032144.879.46761.912.57

87661 60° SAE FLANGE 6000 PSI

6000 PSI working pressure flange;

 Two halves flange with an O Ring Seal ;

60° body elbow;

Zinc-plated carbon steel; stainless steel available;

Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.

Note:

The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 87661 for braid; 87662 for spiral;

Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;

PART NO.THREAD EHOSE BOREO RINGDIMENSIONS
DNDASHACDHL
87661-08-081/2"120818.64x3.5331.723.933.67.9
87661-12-123/4"201224.99x3.5341.331.7448.9
87661-16-121"201232.92x3.5347.6389.6
87661-16-161"251632.92x3.5347.63847.79.6
87661-16-201"322032.92x3.5347.6389.6
87661-20-161.1/4"251637.69x3.535443.610.4
87661-20-201.1/4"322037.69x3.535443.655.710.4
87661-24-201.1/2"322047.22x3.5363.550.858.312.7
87661-24-241.1/2"402447.22x3.5363.550.86512.7
87661-32-242"402456.74x3.5379.466.56512.7
87661-32-322"503256.74x3.5379.466.576.312.7

87661(V62.5) 62.5° SAE FLANGE 6000 PSI

6000 PSI working pressure flange;

 Two halves flange with an O Ring Seal ;

62.5° body elbow;

Zinc-plated carbon steel; stainless steel available;

Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.

Note:

The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 87661 for braid; 87662 for spiral;

Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;

PART NO.THREAD EHOSE BOREDIMENSIONS
DNDASHACDHL
87661-12-12(V62.5)3/4"201293.341.332468.76
87661-16-16(V62.5)1"2516108.347.63850.99.53
87661-20-20(V62.5)1.1/4"3220127.8544461.110.29
87661-24-24(V62.5)1.1/2"402415363.55172.812.57

87691 90° SAE FLANGE 6000 PSI

6000 PSI working pressure flange;

 Two halves flange with an O Ring Seal ;

90° body elbow;

Zinc-plated carbon steel; stainless steel available;

Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.

Note:

The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 87691 for braid;87692 for spiral;

Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;

PART NO.THREAD EHOSE BOREDIMENSIONS
DNDASHACDHL
87691-08-081/2"12084131.724487.75
87691-12-103/4"16105641.33256.58.76
87691-12-123/4"201265.541.332668.76
87691-16-121"201265.547.638699.53
87691-16-161"251676.747.63874.59.53
87691-16-201"322091.547.63885.59.53
87691-20-161.1/4"251676.7544478.510.29
87691-20-201.1/4"322091.5544489.510.29
87691-24-201.1/2"322091.563.55194.512.57
87691-24-241.1/2"4024109.463.55110812.57
87691-32-242"4024109.479.46711612.57
87691-32-322"5032131.879.467136.312.57

87691-H 90° SAE FLANGE 6000 PSI

6000 PSI working pressure flange;

 Two halves flange with an O Ring Seal ;

90° body elbow;

Zinc-plated carbon steel; stainless steel available;

Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.

Note:

The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 87691 for braid;87692 for spiral;

Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;

PART NO.THREAD EHOSE BOREDIMENSIONS
DNDASHACHL
87691-12-12(H100)3/4"201265.541.31008.76
87691-12-12(H127)3/4"201265.541.31278.76
87691-12-12(H150)3/4"201265.541.31508.76
87691-16-16(H100)1"251676.747.61009.53
87691-16-16(H127)1"251676.747.61279.53
87691-16-16(H150)1"251676.747.61509.53
87691-20-20(H100)1.1/4"322091.55410010.29
87691-20-20(H127)1.1/4"322091.55412710.29
87691-20-20(H150)1.1/4"322091.55415010.29
87691-24-24(H100)1.1/2"4024109.463.510012.57
87691-24-24(H127)1.1/2"4024109.463.512712.57
Feel Free to Contact us

    Related Products

    swaged npt fittings

    Swaged NPT Fittings

    Swaged NPT fittings refers to the fittings that have National Pipe Tapered thread, which can mate stright thread for seal, here male port offered with 60° chamfer.

    SAE O Ring Seal Male Fittings

    Swaged SAE O-Ring Seal Fittings

    Swaged SAE O-Ring seal Fittings refers to male hydraulic fittings which have a o-ring seal at the root of the thread, either in the groove or on the boss seat.

    swaged JIC 74 cone seal fittings

    Swaged JIC 74 Cone Seal Fittings

    Swaged JIC 74 cone seal fittings refer to a 74 flared seat on the male thread and a 74 inverted flare on the female mandrel,they have JIC type thread confrom to SAE J514 standard.

    swaged JIC 74 cone seal fittings

    Swaged SAE 90 Cone Seal Fittings

    Swaged SAE 90 cone seal fittings refer to a 90° flared seat on the top of male thread, and a 90° inverted flare on the female mandrel. the thread type conform to SAE J512

    swaged orfs fittings

    Swaged ORFS Fittings

    Swaged ORFS fittings have O-Ring Flat Seal interface when male thread matches female thread, an O-Ring in the groove of the male thread and an flat seat on the female mandrel.

    swaged npsm 60 cone seal fittings

    Swaged NPSM Fittings

    Swaged NPSM fittings haw npsm standard thread, that is a straight thread (not tapered), they have 60° cone seat on the female mandrel, swaged tail, widely used in the North America.

    swaged SAE flange fittings

    Swaged SAE Flange 3000 Fittings

    Swaged SAE Flange 3000 Fittings have flange connectiong port which comply with SAE standard, the working pressure the fitting endure is 3000 PSI, and with swaged tail.