SWAGED JIC 74° CONE SEAL FITTINGS
Swaged JIC 74 Cone Seal Fittings
Seal type: 74° inverted flare on the female fittings; mated 74° flare seat on the male fittings;
Thread type: SAE J514 thread standard;
Tail type: swaged; mated with corresponding ferrule to be crimped;
Material: Zinc plated carbon steel; stainless steel available;
16711 JIC MALE 74° CONE SEAT
Description:
Seal type: 74° flare seat on the male fittings;
Thread type: SAE J514 thread standard;
Tail type: swaged; mated with corresponding ferrule to be crimped;
Material: Zinc plated carbon steel; stainless steel available;
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 16711 for braid; 16712 for spiral;
Featured image:
Tech Specification:
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | |||
|---|---|---|---|---|---|---|
| DN | DASH | A | C | S1 | ||
| 16711-04-03 | 7/16"x20 | 5 | 03 | 26 | 14 | 12 |
| 16711-04-04 | 7/16"x20 | 6 | 04 | 26.5 | 14 | 12 |
| 16711-05-04 | 1/2"x20 | 6 | 04 | 26.5 | 14 | 14 |
| 16711-05-05 | 1/2"x20 | 8 | 05 | 26.5 | 14 | 14 |
| 16711-05-06 | 1/2"x20 | 10 | 06 | 26.5 | 14 | 17 |
| 16711-06-04 | 9/16"x18 | 6 | 04 | 26.5 | 14.1 | 17 |
| 16711-06-05 | 9/16"x18 | 8 | 05 | 26.5 | 14.1 | 17 |
| 16711-06-06 | 9/16"x18 | 10 | 06 | 26.5 | 14.1 | 17 |
| 16711-08-06 | 3/4"x16 | 10 | 06 | 31.5 | 16.7 | 22 |
| 16711-08-08 | 3/4"x16 | 12 | 08 | 32 | 16.7 | 22 |
| 16711-10-06 | 7/8"X14 | 10 | 06 | 33.5 | 19.3 | 24 |
| 16711-10-08 | 7/8"X14 | 12 | 08 | 34 | 19.3 | 24 |
| 16711-10-10 | 7/8"X14 | 16 | 10 | 35 | 19.3 | 24 |
| 16711-12-08 | 1.1/16"x12 | 12 | 08 | 38.5 | 21.9 | 30 |
| 16711-12-10 | 1.1/16"x12 | 16 | 10 | 39.5 | 21.9 | 30 |
| 16711-12-12 | 1.1/16"x12 | 20 | 12 | 40 | 21.9 | 30 |
| 16711-12-16 | 1.1/16"x12 | 25 | 16 | 42 | 21.9 | 30 |
| 16711-14-10 | 1.3/16"x12 | 16 | 10 | 41.5 | 22.6 | 32 |
| 16711-14-12 | 1.3/16"x12 | 20 | 12 | 40.5 | 22.6 | 32 |
| 16711-16-12 | 1.5/16"x12 | 20 | 12 | 43 | 23.1 | 36 |
| 16711-16-16 | 1.5/16"x12 | 25 | 16 | 43.5 | 23.1 | 36 |
| 16711-20-16 | 1.5/8"x12 | 25 | 16 | 47 | 24.3 | 46 |
| 16711-20-20 | 1.5/8"x12 | 32 | 20 | 47.5 | 24.3 | 46 |
| 16711-24-20 | 1.7/8"x12 | 32 | 20 | 53 | 27.5 | 50 |
| 16711-24-24 | 1.7/8"x12 | 40 | 24 | 53 | 27.5 | 50 |
| 16711-32-32 | 1.1/2"x12 | 50 | 32 | 62 | 33.9 | 65 |
16711L JIC MALE 74° CONE
Description:
Seal type: 74° flare seat on the male fittings;
Thread type: SAE J514 thread standard;
Tail type: swaged; mated with corresponding ferrule to be crimped;
Material: Zinc plated carbon steel; stainless steel available;
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 16711 for braid; 16712 for spiral;
Featured image:
Tech Specification:
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | |||
|---|---|---|---|---|---|---|
| DN | DASH | A | C | S1 | ||
| 16711L-04-04 | 7/16"x20 | 6 | 04 | 43 | 30.5 | 17 |
| 16711L-05-04 | 1/2"x20 | 6 | 04 | 43 | 30.5 | 19 |
| 16711L-05-05 | 1/2"x20 | 8 | 05 | 43 | 30.5 | 19 |
| 16711L-06-04 | 9/16"x18 | 6 | 04 | 47 | 32.5 | 22 |
| 16711L-06-05 | 9/16"x18 | 8 | 05 | 47 | 32.5 | 22 |
| 16711L-06-06 | 9/16"x18 | 10 | 06 | 47 | 32.5 | 22 |
| 16711L-08-06 | 3/4"x16 | 10 | 06 | 51 | 36.5 | 24 |
| 16711L-08-08 | 3/4"x16 | 12 | 08 | 51.5 | 36.5 | 24 |
| 16711L-10-06 | 7/8"x14 | 10 | 06 | 56.5 | 40 | 30 |
| 16711L-10-08 | 7/8"x14 | 12 | 08 | 57 | 40 | 30 |
| 16711L-10-10 | 7/8"x14 | 16 | 10 | 58 | 40 | 30 |
| 16711L-12-08 | 1.1/16"x12 | 12 | 08 | 63 | 44.5 | 36 |
| 16711L-12-10 | 1.1/16"x12 | 16 | 10 | 64 | 44.5 | 36 |
| 16711L-12-12 | 1.1/16"x12 | 20 | 12 | 64 | 44.5 | 36 |
| 16711L-16-12 | 1.5/16"x12 | 20 | 12 | 66 | 44.5 | 41 |
| 16711L-16-16 | 1.5/16"x12 | 25 | 16 | 67 | 44.5 | 41 |
| 16711L-20-16 | 1.5/8"x12 | 25 | 16 | 70.5 | 45.7 | 50 |
| 16711L-20-20 | 1.5/8"x12 | 32 | 20 | 71.2 | 45.7 | 50 |
| 16711L-24-20 | 1.7/8"x12 | 32 | 20 | 71.5 | 46 | 55 |
| 16711L-24-24 | 1.7/8"x12 | 40 | 24 | 71.5 | 46 | 55 |
26711 JIC FEMALE 74° CONE SEAT
Description:
Seal type: 74° inverted flare on the female fittings; mated 74° flare seat on the male fittings;
Thread type: SAE J514 thread standard;
Tail type: swaged; mated with corresponding ferrule to be crimped;
Material: Zinc plated carbon steel; stainless steel available;
Body Angle: Straight;
Note:
1. The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 20141 for braid; 20142 for spiral;
2. Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
Featured image:
Tech Specification:
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | |||
|---|---|---|---|---|---|---|
| DN | DASH | A | C | S1 | ||
| 26711-04-03 | 7/16"x20 | 5 | 03 | 14.5 | 9 | 15 |
| 26711-04-04 | 7/16"x20 | 6 | 04 | 15 | 9 | 15 |
| 26711-05-04 | 1/2"x20 | 6 | 04 | 16 | 9.5 | 17 |
| 26711-05-05 | 1/2"x20 | 8 | 05 | 16 | 9.5 | 17 |
| 26711-05-06 | 1/2"x20 | 10 | 06 | 16.5 | 9.5 | 17 |
| 26711-06-04 | 9/16"x18 | 6 | 04 | 16.5 | 10.5 | 19 |
| 26711-06-05 | 9/16"x18 | 8 | 05 | 16 | 10.5 | 19 |
| 26711-06-06 | 9/16"x18 | 10 | 06 | 16.5 | 10.5 | 19 |
| 26711-06-08 | 9/16"x18 | 12 | 08 | 16 | 10.5 | 19 |
| 26711-08-06 | 3/4"x16 | 10 | 06 | 18 | 11 | 24 |
| 26711-08-08 | 3/4"x16 | 12 | 08 | 18.5 | 11 | 24 |
| 26711-08-10 | 3/4"x16 | 16 | 10 | 19.5 | 11 | 24 |
| 26711-10-08 | 7/8"x14 | 12 | 08 | 19.5 | 13 | 27 |
| 26711-10-10 | 7/8"x14 | 16 | 10 | 20.5 | 13 | 27 |
| 26711-10-12 | 7/8"x14 | 20 | 12 | 20 | 13 | 7 |
| 26711-12-08T | 1.1/16"x12 | 12 | 08 | 19 | 15 | 32 |
| 26711-12-10 | 1.1/16"x12 | 16 | 10 | 21.5 | 15 | 32 |
| 26711-12-12 | 1.1/16"x12 | 20 | 12 | 21.5 | 15 | 32 |
| 26711-12-16 | 1.1/16"x12 | 25 | 16 | 23.5 | 15 | 32 |
| 26711-14-12 | 1.3/16"x12 | 20 | 12 | 21.5 | 15 | 36 |
| 26711-16-12T | 1.5/16"x12 | 20 | 12 | 18.5 | 16 | 41 |
| 26711-16-16 | 1.5/16"x12 | 25 | 16 | 24.5 | 16 | 41 |
| 26711-16-20 | 1.5/16"x12 | 32 | 20 | 24 | 16 | 41 |
| 26711-20-16T | 1.5/8"x12 | 25 | 16 | 23 | 17 | 50 |
| 26711-20-20W | 1.5/8"x12 | 32 | 20 | 26 | 17 | 50 |
| 26711-24-20W | 1.7/8"x12 | 32 | 20 | 26.5 | 20 | 55 |
| 26711-24-24W | 1.7/8"x12 | 40 | 24 | 26.5 | 20 | 55 |
| 26711-32-24T | 2.1/2"x12 | 40 | 24 | 27 | 23.5 | 75 |
| 26711-32-32T | 2.1/2"x12 | 50 | 32 | 27 | 23.5 | 75 |
26711D JIC FEMALE 74° CONE SEAT DOUBLE HEXAGON
Description:
Seal type: 74° inverted flare on the female fittings; mated 74° flare seat on the male fittings;
Thread type: SAE J514 thread standard;
Tail type: swaged; mated with corresponding ferrule to be crimped;
Material: Zinc plated carbon steel; stainless steel available;
Body Angle: Straight;
Note:
1. The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 26711 for braid; 26712 for spiral;
2. Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
3. Item code with “D” means double nut on the female fittings.
Featured image:
Tech Specification:
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | ||||
|---|---|---|---|---|---|---|---|
| DN | DASH | A | C | S1 | S2 | ||
| 26711D-04-04 | 7/16"x20 | 6 | 04 | 20 | 9 | 17 | 15 |
| 26711D-05-04 | 1/2"x20 | 6 | 04 | 21 | 9.5 | 17 | 17 |
| 26711D-06-04 | 9/16"x18 | 6 | 04 | 21 | 10.5 | 19 | 19 |
| 26711D-06-06 | 9/16"x18 | 10 | 06 | 21 | 10.5 | 19 | 19 |
| 26711D-08-06 | 3/4"x16 | 10 | 06 | 25 | 11 | 24 | 24 |
| 26711D-08-08 | 3/4"x16 | 12 | 08 | 24.5 | 11 | 24 | 24 |
| 26711D-08-10 | 3/4"x16 | 16 | 10 | 25.5 | 11 | 24 | 24 |
| 26711D-10-08 | 7/8"x14 | 12 | 08 | 28 | 13 | 27 | 27 |
| 26711D-10-10 | 7/8"x14 | 16 | 10 | 29 | 13 | 27 | 27 |
| 26711D-12-12 | 1.1/16"x12 | 20 | 12 | 31.5 | 15 | 32 | 32 |
| 26711D-16-12 | 1.5/16"x12 | 20 | 12 | 33.5 | 16 | 41 | 41 |
| 26711D-16-16 | 1.5/16"x12 | 25 | 16 | 34.5 | 16 | 41 | 41 |
| 26711D-16-20 | 1.5/16"x12 | 32 | 20 | 36.5 | 16 | 41 | 41 |
| 26711D-20-20W | 1.7/16"x12 | 32 | 20 | 41 | 17 | 50 | 50 |
26711D-SM JIC FEMALE 74° CONE SEAT DOUBLE HEXAGON
Description:
Seal type: 74° inverted flare on the female fittings; mated 74° flare seat on the male fittings;
Thread type: SAE J514 thread standard;
Tail type: swaged; mated with corresponding ferrule to be crimped;
Material: Zinc plated carbon steel; stainless steel available;
Body Angle: Straight;
Note:
1. The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 26711 for braid; 26712 for spiral;
2. Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
3. Item code with “D” means double nut on the female fittings.
Featured image:
Tech Specification:
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | ||||
|---|---|---|---|---|---|---|---|
| DN | DASH | A | C | S1 | S2 | ||
| 26711D-04-04SM | 7/16"x20 | 6 | 04 | 20 | 9 | 12 | 15 |
| 26711D-05-04SM | 1/2"x20 | 6 | 04 | 20.5 | 9.5 | 12 | 17 |
| 26711D-06-04SM | 9/16"X18 | 6 | 04 | 21 | 10.5 | 14 | 19 |
| 26711D-06-06SM | 9/16"X18 | 10 | 06 | 21 | 10.5 | 17 | 19 |
| 26711D-08-06SM | 3/4"x16 | 10 | 06 | 23 | 11 | 19 | 24 |
| 26711D-08-08SM | 3/4"x16 | 12 | 08 | 24.5 | 11 | 22 | 24 |
| 26711D-08-10SM | 3/4"x16 | 16 | 10 | 25.5 | 11 | 22 | 24 |
| 26711D-10-08SM | 7/8"x14 | 12 | 08 | 26 | 13 | 22 | 27 |
| 26711D-10-10SM | 7/8"x14 | 16 | 10 | 27 | 13 | 22 | 27 |
| 26711D-12-12SM | 1.1/16"x12 | 20 | 12 | 31.5 | 15 | 27 | 32 |
| 26711D-16-12SM | 1.5/16"x12 | 20 | 12 | 31.5 | 16 | 32 | 41 |
| 26711D-16-16SM | 1.5/16"x12 | 25 | 16 | 33 | 16 | 32 | 41 |
| 26711D-20-20WSM | 1.7/16"x12 | 32 | 20 | 39 | 17 | 41 | 50 |
26741 45° JIC MALE 74° CONE SEAT
Description:
Seal type: 74° inverted flare on the female fittings; mated 74° flare seat on the male fittings;
Thread type: SAE J514 thread standard;
Tail type: swaged; mated with corresponding ferrule to be crimped;
Material: Zinc plated carbon steel; stainless steel available;
Body Angle: 45°;
Note:
1. The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 26741 for braid; 26742 for spiral;
2. Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
Featured image:
Tech Specification:
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | ||||
|---|---|---|---|---|---|---|---|
| DN | DASH | A | C | H | S2 | ||
| 26741-04-03 | 7/16"x20 | 5 | 03 | 37.6 | 9 | 17.2 | 15 |
| 26741-04-04 | 7/16"x20 | 6 | 04 | 40.2 | 9 | 18.1 | 15 |
| 26741-05-04 | 1/2"x20 | 6 | 04 | 40.5 | 9.5 | 18.5 | 17 |
| 26741-05-05 | 1/2"x20 | 8 | 05 | 42.7 | 9.5 | 19.3 | 17 |
| 26741-05-06 | 1/2"x20 | 10 | 06 | 44.6 | 9.5 | 20.3 | 17 |
| 26741-06-04 | 9/16"x18 | 6 | 04 | 40.5 | 10.5 | 18.5 | 19 |
| 26741-06-05 | 9/16"x18 | 8 | 05 | 42.6 | 10.5 | 19.3 | 19 |
| 26741-06-06 | 9/16"x18 | 10 | 06 | 44.3 | 10.5 | 20 | 19 |
| 26741-08-06 | 3/4"x16 | 10 | 06 | 45.7 | 11 | 21.4 | 24 |
| 26741-08-08 | 3/4"x16 | 12 | 08 | 57.9 | 11 | 22.9 | 24 |
| 26741-10-08 | 7/8"x14 | 12 | 08 | 58.9 | 13 | 24 | 27 |
| 26741-10-10 | 7/8"x14 | 16 | 10 | 69.6 | 13 | 25.3 | 27 |
| 26741-10-12 | 7/8"x14 | 20 | 12 | 75.7 | 13 | 28.9 | 27 |
| 26741-12-08 | 1.1/16"x12 | 12 | 08 | 60 | 15 | 25.1 | 32 |
| 26741-12-10 | 1.1/16"x12 | 16 | 10 | 70.7 | 15 | 26.4 | 32 |
| 26741-12-12 | 1.1/16"x12 | 20 | 12 | 76.8 | 15 | 30 | 32 |
| 26741-14-12 | 1.3/16"x12 | 20 | 12 | 77.4 | 15 | 30 | 36 |
| 26741-16-12 | 1.5/16"x12 | 20 | 12 | 77.4 | 16 | 30 | 41 |
| 26741-16-16 | 1.5/16"x12 | 25 | 16 | 85.7 | 16 | 31.5 | 41 |
| 26741-20-20W | 1.5/8"x12 | 32 | 20 | 95.9 | 17 | 35.2 | 50 |
| 26741-24-20W | 1.7/8"x12 | 32 | 20 | 100.9 | 20 | 40.1 | 55 |
| 26741-24-24W | 1.7/8"x12 | 40 | 24 | 114.8 | 20 | 44.1 | 55 |
| 26741-32-32W | 2.1/2"x12 | 50 | 32 | 135.9 | 23.5 | 51.6 | 75 |
26791 90° JIC FEMALE 74° CONE SEAT
Description:
Seal type: 74° inverted flare on the female fittings; mated 74° flare seat on the male fittings;
Thread type: SAE J514 thread standard;
Tail type: swaged; mated with corresponding ferrule to be crimped;
Material: Zinc plated carbon steel; stainless steel available;
Body Angle: 90°;
Note:
1. The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 26791 for braid; 26792 for spiral;
2. Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
3. Item code with “W” means the nut has a little hose to penetrate transware against loosening.
Featured image:
Tech Specification:
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | ||||
|---|---|---|---|---|---|---|---|
| DN | DASH | A | C | H | S2 | ||
| 26791-04-03 | 7/16"x20 | 5 | 03 | 26.5 | 9 | 30.5 | 15 |
| 26791-04-04 | 7/16"x20 | 6 | 04 | 30 | 9 | 33.5 | 15 |
| 26791-05-04 | 1/2"x20 | 6 | 04 | 30 | 9.5 | 34 | 17 |
| 26791-05-05 | 1/2"x20 | 8 | 05 | 33 | 9.5 | 37 | 17 |
| 26791-05-06 | 1/2"x20 | 10 | 06 | 35.3 | 10.5 | 39.3 | 17 |
| 26791-06-04 | 9/16"x18 | 6 | 04 | 30 | 10.5 | 34 | 19 |
| 26791-06-05 | 9/16"x18 | 8 | 05 | 30 | 10.5 | 37 | 19 |
| 26791-06-06 | 9/16"x18 | 10 | 06 | 35.3 | 10.5 | 39.3 | 19 |
| 26791-06-08 | 9/16"x18 | 12 | 08 | 35.8 | 11 | 39.8 | 19 |
| 26791-08-06 | 3/4"x16 | 10 | 06 | 35.3 | 11 | 41.3 | 24 |
| 26791-08-08 | 3/4"x16 | 12 | 08 | 41 | 11 | 47.5 | 24 |
| 26791-08-10 | 3/4"x16 | 16 | 10 | 49 | 13 | 47.5 | 24 |
| 26791-10-08 | 7/8"x14 | 12 | 08 | 41 | 13 | 48 | 27 |
| 26791-10-10 | 7/8"x14 | 16 | 10 | 56 | 13 | 52.5 | 27 |
| 26791-10-12 | 7/8"x14 | 20 | 12 | 64.9 | 15 | 62 | 27 |
| 26791-12-08 | 1.1/16'x12 | 12 | 08 | 41 | 15 | 49.5 | 32 |
| 26791-12-10 | 1.1/16'x12 | 16 | 10 | 56 | 15 | 54 | 32 |
| 26791-12-12 | 1.1/16'x12 | 20 | 12 | 65.5 | 15 | 63.5 | 32 |
| 26791-12-16 | 1.1/16'x12 | 25 | 74 | 15 | 63.5 | 32 | |
| 26791-14-12 | 1.3/16'x12 | 20 | 16 | 65.5 | 15 | 63.5 | 36 |
| 26791-16-12 | 1.5/16'x12 | 20 | 12 | 65.5 | 16 | 63.5 | 41 |
| 26791-16-16 | 1.5/16'x12 | 25 | 16 | 76.7 | 16 | 70 | 41 |
| 26791-20-20W | 1.5/8"x12 | 32 | 20 | 91.5 | 17 | 80.5 | 50 |
| 26791-24-20W | 1.7/8"x12 | 32 | 20 | 91.5 | 20 | 80.5 | 55 |
| 26791-24-24W | 1.7/8"x12 | 40 | 24 | 109.4 | 20 | 94 | 55 |
| 26791-32-32W | 2.1/2"x12 | 50 | 32 | 133.1 | 23.5 | 121.8 | 75 |
26791-H 90° JIC FEMALE 74° CONE SEAT
Description:
Seal type: 74° inverted flare on the female fittings; mated 74° flare seat on the male fittings;
Thread type: SAE J514 thread standard;
Tail type: swaged; mated with corresponding ferrule to be crimped;
Material: Zinc plated carbon steel; stainless steel available;
Body Angle: 90°;
Note:
1. The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 26791 for braid; 26792 for spiral;
Featured image:
Tech Specification:
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | ||||
|---|---|---|---|---|---|---|---|
| DN | DASH | A | C | H | S2 | ||
| 26791-06-04(H66) | 9/16"x18 | 6 | 04 | 30 | 10.5 | 66 | 19 |
| 26791-08-06(H78) | 3/4"x16 | 10 | 06 | 35.3 | 11 | 78 | 24 |
| 26791-10-08(H86) | 7/8"x14 | 12 | 08 | 41 | 13 | 86 | 27 |
| 26791-12-12(H135) | 1.1/16"x12 | 20 | 12 | 65.5 | 15 | 135 | 32 |
| 26791-16-16(H140) | 1.5/16"x12 | 25 | 16 | 76.7 | 16 | 140 | 41 |
26791K 90° JIC COMPACT FEMALE 74° CONE SEAT
Description:
Seal type: 74° inverted flare on the female fittings; mated 74° flare seat on the male fittings;
Thread type: SAE J514 thread standard;
Tail type: swaged; mated with corresponding ferrule to be crimped;
Material: Zinc plated carbon steel; stainless steel available;
Body Angle: 90°;
Note:
1. The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 26791 for braid; 26792 for spiral;
Featured image:
Tech Specification:
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | |||||
|---|---|---|---|---|---|---|---|---|
| DN | DASH | A | C | H | S1 | S2 | ||
| 26791K-04-04 | 7/16"x20 | 6 | 04 | 17.5 | 9 | 18 | 11 | 15 |
| 26791K-06-04 | 9/16"x18 | 6 | 04 | 20 | 10.5 | 20.5 | 14 | 19 |
| 26791K-06-06 | 9/16"x18 | 10 | 06 | 20 | 10.5 | 20.5 | 16 | 19 |
| 26791K-08-06 | 3/4"x16 | 10 | 06 | 23 | 11 | 25 | 19 | 24 |
| 26791K-08-08 | 3/4"x16 | 12 | 08 | 23.5 | 11 | 25 | 22 | 24 |
| 26791K-10-08 | 7/8"x14 | 12 | 08 | 25 | 13 | 27 | 22 | 27 |
| 26791K-10-10 | 7/8"x14 | 16 | 10 | 25 | 13 | 27 | 22 | 27 |
| 26791K-12-12 | 1.1/16"x12 | 20 | 12 | 29 | 15 | 31 | 27 | 32 |
| 26791K-16-16 | 1.5/16"x12 | 25 | 16 | 43 | 16 | 34.3 | 33 | 41 |
Related Products
Swaged NPT Fittings
Swaged NPT fittings refers to the fittings that have National Pipe Tapered thread, which can mate stright thread for seal, here male port offered with 60° chamfer.
Swaged SAE O-Ring Seal Fittings
Swaged SAE O-Ring seal Fittings refers to male hydraulic fittings which have a o-ring seal at the root of the thread, either in the groove or on the boss seat.
Swaged SAE 90 Cone Seal Fittings
Swaged SAE 90 cone seal fittings refer to a 90° flared seat on the top of male thread, and a 90° inverted flare on the female mandrel. the thread type conform to SAE J512
Swaged ORFS Fittings
Swaged ORFS fittings have O-Ring Flat Seal interface when male thread matches female thread, an O-Ring in the groove of the male thread and an flat seat on the female mandrel.
Swaged NPSM Fittings
Swaged NPSM fittings haw npsm standard thread, that is a straight thread (not tapered), they have 60° cone seat on the female mandrel, swaged tail, widely used in the North America.
Swaged SAE Flange 3000 Fittings
Swaged SAE Flange 3000 Fittings have flange connectiong port which comply with SAE standard, the working pressure the fitting endure is 3000 PSI, and with swaged tail.
Swaged SAE Flange 6000 Fittings
Swaged SAE Flange 6000 Fittings have flange connectiong port which comply with SAE standard, the working pressure the fitting endure is 6000 PSI, and with swaged tail.