SWAGED METRIC FLAT SEAL FITTINGS
Swaged BSP 60 Cone seal fittings
12611 BSP MALE 60° CONE
BSPP standard thread;
Male connection port;
60° Cone Seat Seal;
Straight body elbow;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 20211 for braid; 20212 for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | |||
|---|---|---|---|---|---|---|
| DN | DASH | A | C | S1 | ||
| 12611-02-03 | G1/8"x28 | 5 | 03 | 22 | 10 | 12 |
| 12611-04-04 | G1/4"x19 | 6 | 04 | 24.5 | 12 | 14 |
| 12611-06-05 | G3/8"x19 | 8 | 05 | 26 | 13.5 | 17 |
| 12611-06-06 | G3/8"x19 | 10 | 06 | 27.5 | 13.5 | 17 |
| 12611-06-08 | G3/8"x19 | 12 | 08 | 26.5 | 13.5 | 19 |
| 12611-08-06 | G1/2"x14 | 10 | 06 | 30.5 | 16 | 22 |
| 12611-08-08 | G5/8"x14 | 12 | 08 | 31 | 16 | 22 |
| 12611-10-08 | G5/8"x14 | 12 | 08 | 32.5 | 17.5 | 24 |
| 12611-10-10 | G5/8"x14 | 16 | 10 | 33.5 | 17.5 | 24 |
| 12611-12-08 | G3/4"x14 | 12 | 08 | 35.5 | 18.5 | 27 |
| 12611-12-10 | G3/4"x14 | 16 | 10 | 37 | 18.5 | 27 |
| 12611-12-12 | G3/4"x14 | 20 | 12 | 36.5 | 18.5 | 27 |
| 12611-16-12 | G1"x11 | 20 | 12 | 40.5 | 20.5 | 36 |
| 12611-16-16 | G1"x11 | 25 | 16 | 41.5 | 20.5 | 36 |
| 12611-20-16 | G1.1/4"x11 | 25 | 16 | 43.5 | 20.5 | 46 |
| 12611-20-20 | G1.1/4"x11 | 32 | 20 | 44.5 | 20.5 | 46 |
| 12611-24-20 | G1.1/2"x11 | 32 | 20 | 49 | 23 | 50 |
| 12611-24-24 | G1.1/2"x11 | 40 | 24 | 46 | 23 | 50 |
| 12611-32-32 | G2"x11 | 50 | 32 | 53.5 | 25.5 | 65 |
22611 BSP FEMALE 60° CONE
BSPP standard thread;
Female connection port;
60° Cone Seat Seal;
Straight body elbow;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 20241 for braid; 20242 for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | |||
|---|---|---|---|---|---|---|
| DN | DASH | A | C | S1 | ||
| 22611-02-03 | G1/8"x28 | 5 | 03 | 15 | 5.5 | 14 |
| 22611-02-04 | G1/8"x28 | 6 | 04 | 15 | 5.5 | 14 |
| 22611-04-03 | G1/4"x19 | 5 | 03 | 17 | 5.5 | 19 |
| 22611-04-04 | G1/4"x19 | 6 | 04 | 18 | 5.5 | 19 |
| 22611-04-05 | G1/4"x19 | 8 | 05 | 18 | 5.5 | 19 |
| 22611-04-06 | G1/4"x19 | 10 | 06 | 18 | 5.5 | 19 |
| 22611-06-04 | G3/8"x19 | 6 | 04 | 19 | 6.3 | 22 |
| 22611-06-05 | G3/8"x19 | 8 | 05 | 19 | 6.3 | 22 |
| 22611-06-06 | G3/8"x19 | 10 | 06 | 19.5 | 6.3 | 22 |
| 22611-06-08 | G3/8"x19 | 12 | 08 | 19.5 | 6.3 | 22 |
| 22611-08-06T | G1/2"x14 | 10 | 06 | 21 | 7.5 | 27 |
| 22611-08-08 | G1/2"x14 | 12 | 08 | 21.5 | 7.5 | 27 |
| 22611-10-08 | G5/8"x14 | 12 | 08 | 22 | 9.5 | 30 |
| 22611-10-10 | G5/8"x14 | 16 | 10 | 23 | 9.5 | 30 |
| 22611-12-08T | G3/4"x14 | 12 | 08 | 22 | 10.9 | 32 |
| 22611-12-10 | G3/4"x14 | 16 | 10 | 23.5 | 10.9 | 32 |
| 22611-12-12 | G3/4"x14 | 20 | 12 | 24 | 10.9 | 32 |
| 22611-16-12T | G1"x11 | 20 | 12 | 24 | 11.7 | 41 |
| 22611-16-14 | G1"x11 | 22 | 14 | 26 | 11.7 | 41 |
| 22611-16-16 | G1"x11 | 25 | 16 | 27 | 11.7 | 41 |
| 22611-20-16T | G1.1/4"x11 | 25 | 16 | 27.5 | 11 | 50 |
| 22611-20-20W | G1.1/4"x11 | 32 | 20 | 30.5 | 11 | 50 |
| 22611-24-20T | G1.1/2"x11 | 32 | 20 | 32 | 13 | 55 |
| 22611-24-24W | G1.1/2"x11 | 40 | 24 | 32 | 13 | 55 |
| 22611-32-24T | G2"x11 | 40 | 24 | 30 | 16 | 70 |
| 22611-32-32W | G2"x11 | 50 | 32 | 31.9 | 16 | 70 |
22641 45° BSP FEMALE 60° CONE
BSPP standard thread;
Female connection port;
60° Cone Seat Seal;
45° body elbow;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 22641 for braid; 22642 for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | ||||
|---|---|---|---|---|---|---|---|
| DN | DASH | A | C | H | S2 | ||
| 22641-04-04 | G1/4"x19 | 6 | 04 | 42.3 | 5.5 | 20.2 | 19 |
| 22641-06-04 | G3/8"x19 | 6 | 04 | 43.2 | 6.3 | 21 | 22 |
| 22641-06-05 | G3/8"x19 | 8 | 05 | 45.3 | 6.3 | 22 | 22 |
| 22641-06-06 | G3/8"x19 | 10 | 06 | 46.9 | 6.3 | 22.6 | 22 |
| 22641-08-06T | G1/2"x14 | 10 | 06 | 48.1 | 7.5 | 23.9 | 27 |
| 22641-08-08 | G1/2"x14 | 12 | 08 | 61.1 | 7.5 | 26.1 | 27 |
| 22641-10-08 | G5/8"x14 | 12 | 08 | 61.4 | 9.5 | 26.5 | 30 |
| 22641-10-10 | G5/8"x14 | 16 | 10 | 72.6 | 9.5 | 27.8 | 30 |
| 22641-12-08T | G3/4"x14 | 12 | 08 | 61.8 | 10.9 | 26.9 | 32 |
| 22641-12-10 | G3/4"x14 | 16 | 10 | 73 | 10.9 | 28.2 | 32 |
| 22641-12-12 | G3/4"x14 | 20 | 12 | 79.2 | 10.9 | 31.8 | 32 |
| 22641-16-12T | G1"x11 | 20 | 12 | 80.8 | 11.7 | 33.4 | 41 |
| 22641-16-16 | G1"x11 | 25 | 16 | 88.4 | 11.7 | 34.2 | 41 |
| 22641-20-16T | G1.1/4x11 | 25 | 16 | 85.3 | 11 | 31.1 | 50 |
| 22641-20-20W | G1.1/4x11 | 32 | 20 | 98.8 | 11 | 38 | 50 |
| 22641-24-24W | G1.1/2x11 | 40 | 24 | 116.8 | 13 | 45.5 | 55 |
| 22641-32-32W | G2"x11 | 50 | 32 | 135.7 | 16 | 52.7 | 70 |
22691 90° BSP FEMALE 60° CONE
BSPP standard thread;
Female connection port;
60° Cone Seat Seal;
90° body elbow;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 22691 for braid; 22692 for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | ||||
|---|---|---|---|---|---|---|---|
| DN | DASH | A | C | H | S2 | ||
| 22691-02-03 | G1/8"x28 | 5 | 03 | 26.5 | 5.5 | 31.5 | 14 |
| 22691-02-04 | G1/8"x28 | 6 | 04 | 30 | 5.5 | 34.5 | 14 |
| 22691-04-03 | G1/4"x19 | 5 | 03 | 26.5 | 5.5 | 33.5 | 19 |
| 22691-04-04 | G1/4"x19 | 6 | 04 | 30 | 5.5 | 36.5 | 19 |
| 22691-04-05 | G1/4"x19 | 8 | 05 | 33 | 5.5 | 39.5 | 19 |
| 22691-04-06 | G1/4"x19 | 10 | 06 | 30 | 5.5 | 36.5 | 19 |
| 22691-06-04 | G3/8"x19 | 6 | 04 | 30 | 6.3 | 37.7 | 22 |
| 22691-06-05 | G3/8"x19 | 8 | 05 | 33 | 6.3 | 40.7 | 22 |
| 22691-06-06 | G3/8"x19 | 10 | 06 | 35.3 | 6.3 | 43 | 22 |
| 22691-08-06T | G1/2"x14 | 10 | 06 | 35.3 | 7 | 43.3 | 27 |
| 22691-08-08 | G1/2"x14 | 12 | 08 | 41 | 7.5 | 51 | 27 |
| 22691-08-10 | G1/2"x14 | 16 | 10 | 56.5 | 7.5 | 55.5 | 27 |
| 22691-10-08 | G5/8"x14 | 12 | 08 | 41 | 9.5 | 51.5 | 30 |
| 22691-10-10 | G5/8"x14 | 16 | 10 | 56 | 9.5 | 56 | 30 |
| 22691-12-08T | G3/4"x14 | 12 | 08 | 41 | 10.9 | 52.1 | 32 |
| 22691-12-10 | G3/4"x14 | 16 | 10 | 56.5 | 10.9 | 56.6 | 32 |
| 22691-12-12 | G3/4"x14 | 20 | 12 | 64.9 | 10.9 | 66.1 | 32 |
| 22691-16-12T | G1"x11 | 20 | 12 | 65.5 | 11.7 | 68.3 | 41 |
| 22691-16-14 | G1"x11 | 22 | 14 | 71.2 | 11.7 | 69.3 | 41 |
| 22691-16-16 | G1"x11 | 25 | 16 | 76.7 | 11.7 | 73.8 | 41 |
| 22691-20-16T | G1.1/4"x11 | 25 | 16 | 78 | 11 | 69.5 | 50 |
| 22691-20-20W | G1.1/4"x11 | 32 | 20 | 91.5 | 11 | 84.3 | 50 |
| 22691-24-24W | G1.1/2"x11 | 40 | 24 | 109.4 | 13 | 103 | 55 |
| 22691-32-32W | G2"x11 | 50 | 32 | 131.8 | 16 | 123.3 | 70 |
12611A BSP MALE DOUBLE USE FOR 60° CONE SEAT OR DAND SEAL
BSPP standard thread;
Male connection port;
60° Cone Seat Seal;
Straight body elbow;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 12611 for braid;12612 for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | |||
|---|---|---|---|---|---|---|
| DN | DASH | A | C | S1 | ||
| 12611A-02-03 | G1/8"x28 | 5 | 03 | 22 | 10 | 14 |
| 12611A-04-04 | G1/4"x19 | 6 | 04 | 24.5 | 12 | 19 |
| 12611A-04-05 | G1/4"x19 | 8 | 05 | 24.5 | 12 | 19 |
| 12611A-06-05 | G3/8"x19 | 8 | 05 | 26 | 13.5 | 22 |
| 12611A-06-06 | G3/8"x19 | 10 | 06 | 28 | 13.5 | 22 |
| 12611A-06-08 | G3/8"x19 | 12 | 08 | 28.5 | 13.5 | 22 |
| 12611A-08-06 | G1/2"x14 | 10 | 06 | 33 | 16 | 27 |
| 12611A-08-08 | G1/2"x14 | 12 | 08 | 33.5 | 16 | 27 |
| 12611A-08-10 | G1/2"x14 | 16 | 10 | 32 | 16 | 27 |
| 12611A-10-08 | G5/8"x14 | 12 | 08 | 35 | 17.5 | 30 |
| 12611A-10-10 | G5/8"x14 | 16 | 10 | 36 | 17.5 | 30 |
| 12611A-12-08 | G3/4"x14 | 12 | 08 | 36.5 | 18.5 | 32 |
| 12611A-12-10 | G3/4"x14 | 16 | 10 | 37.5 | 18.5 | 32 |
| 12611A-12-12 | G3/4"x14 | 20 | 12 | 37.5 | 18.5 | 32 |
| 12611A-16-12 | G1"x11 | 20 | 12 | 42.5 | 20.5 | 41 |
| 12611A-16-16 | G1"x11 | 25 | 16 | 43.5 | 20.5 | 41 |
| 12611A-20-16 | G1.1/4"x11 | 25 | 16 | 45.5 | 20.5 | 50 |
| 12611A-20-20 | G1.1/4"x11 | 32 | 20 | 46.5 | 20.5 | 50 |
| 12611A-24-24 | G1.1/2"x11 | 40 | 24 | 49 | 23 | 55 |
| 12611A-32-32 | G2"x11 | 50 | 32 | 54.5 | 25.5 | 70 |
22611D BSP FEMALE 60° CONE DOUBLE HEXAGON
BSPP standard thread;
Female connection port;
60° Cone Seat Seal;
Straight body elbow;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 22611 for braid; 22612 for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | ||||
|---|---|---|---|---|---|---|---|
| DN | DASH | A | C | S1 | S2 | ||
| 22611D-04-04 | G1/4"x19 | 6 | 04 | 23.5 | 5.5 | 19 | 19 |
| 22611D-06-06 | G3/8"x19 | 10 | 06 | 26.5 | 6.3 | 22 | 22 |
| 22611D-08-08 | G1/2"x14 | 12 | 08 | 31 | 7.5 | 27 | 27 |
| 22611D-10-08 | G5/8"x14 | 12 | 08 | 31 | 9.5 | 30 | 30 |
| 22611D-12-08 | G3/4"x14 | 12 | 08 | 31.5 | 10.9 | 32 | 32 |
| 22611D-12-12 | G3/4"x14 | 20 | 12 | 33.5 | 10.9 | 32 | 32 |
| 22611D-16-16 | G1"x11 | 25 | 16 | 35.5 | 11.7 | 41 | 41 |
| 22611D-20-20W | G1.1/4"x11 | 32 | 20 | 44 | 11 | 50 | 50 |
22611D-SM BSP FEMALE 60° CONE DOUBLE HEXAGON
BSPP standard thread;
Female connection port;
60° Cone Seat Seal;
Straight body elbow;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 22611 for braid; 22612for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | ||||
|---|---|---|---|---|---|---|---|
| DN | DASH | A | C | S1 | S2 | ||
| 22611D-04-04SM | G1/4"x19 | 6 | 04 | 23.5 | 5.5 | 14 | 19 |
| 22611D-06-06SM | G3/8"x19 | 10 | 06 | 24.5 | 6.3 | 17 | 22 |
| 22611D-08-08SM | G1/2"x14 | 12 | 08 | 29 | 7.5 | 22 | 27 |
| 22611D-10-08SM | G5/8"x14 | 12 | 08 | 29 | 9.5 | 22 | 30 |
| 22611D-12-08SM | G3/4"x14 | 12 | 08 | 31.5 | 10.9 | 27 | 32 |
| 22611D-12-12SM | G3/4"x14 | 20 | 12 | 33.5 | 10.9 | 27 | 32 |
| 22611D-16-16SM | G1"x11 | 25 | 16 | 35.5 | 11.7 | 32 | 41 |
| 22611D-20-20WSM | G1.1/4"x11 | 32 | 20 | 42 | 11 | 41 | 50 |
22691D 90° BSP FEMALE 60° CONE DOUBLE HEXAGON
BSPP standard thread;
Female connection port;
60° Cone Seat Seal;
90° body elbow;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 22691 for braid; 22692 for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | ||||
|---|---|---|---|---|---|---|---|
| DN | DASH | A | C | S1 | S2 | ||
| 22691D-04-04 | G1/4"x19 | 6 | 04 | 30 | 5.5 | 19 | 19 |
| 22691D-06-06 | G3/8"x19 | 10 | 06 | 35.3 | 6.3 | 22 | 22 |
| 22691D-08-08 | G1/2"x14 | 12 | 08 | 41 | 7.5 | 27 | 27 |
| 22691D12-12 | G3/4"x14 | 20 | 12 | 65.5 | 10.9 | 32 | 32 |
| 22691D-16-16 | G1"x11 | 25 | 16 | 76.7 | 11.7 | 41 | 41 |
22691D-SM 90° BSP FEMALE 60° CONE DOUBLE HEXAGON
BSPP standard thread;
Female connection port;
60° Cone Seat Seal;
90° body elbow;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 22691 for braid; 22692 for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | |||||
|---|---|---|---|---|---|---|---|---|
| DN | DASH | A | C | H | S1 | S2 | ||
| 22691D-04-04SM | G1/4"x19 | 6 | 04 | 30 | 5.5 | 40.5 | 14 | 19 |
| 22691D-06-06SM | G3/8"x19 | 10 | 06 | 35.3 | 6.3 | 49 | 17 | 22 |
| 22691D-08-08SM | G1/2"x14 | 12 | 08 | 41 | 7.5 | 58 | 22 | 27 |
| 22691D-10-09SM | G5/8"x14 | 12 | 08 | 41 | 9.5 | 58 | 22 | 30 |
| 22691D-12-08SM | G3/4"x14 | 12 | 08 | 41.5 | 10.9 | 58 | 27 | 32 |
| 22691D-12-12SM | G3/4"x14 | 20 | 12 | 65.5 | 10.9 | 74 | 27 | 32 |
| 22691D-16-16SM | G1"x11 | 25 | 16 | 76.7 | 11.7 | 82.8 | 32 | 41 |
22691K 90° BSP FEMALE 60° CONE
BSPP standard thread;
Female connection port;
60° Cone Seat Seal;
90° body elbow;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 22691 for braid; 22692 for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | |||||
|---|---|---|---|---|---|---|---|---|
| DN | DASH | A | C | H | S1 | S2 | ||
| 22691K-04-04 | G1/4"x19 | 6 | 04 | 17.5 | 5.5 | 18.5 | 11 | 19 |
| 22691K-06-04 | G3/8"x19 | 6 | 04 | 20 | 6.3 | 24 | 16 | 22 |
| 22691K-06-05 | G3/8"x19 | 8 | 05 | 20 | 6.3 | 24 | 16 | 22 |
| 22691K-06-06 | G3/8"x19 | 10 | 06 | 20 | 6.3 | 24 | 16 | 22 |
| 22691K-08-06 | G1/2"14 | 10 | 06 | 23 | 7.5 | 28.5 | 19 | 27 |
| 22691K-08-08 | G1/2"14 | 12 | 08 | 23.5 | 7.5 | 28.5 | 19 | 27 |
| 22691K-10-10 | G5/8"x14 | 16 | 10 | 24.5 | 9.5 | 30.5 | 22 | 30 |
| 22691K-12-12 | G3/4"x14 | 20 | 12 | 27.5 | 10.9 | 33 | 27 | 32 |
| 22691K-16-16 | G1"x11 | 25 | 16 | 43 | 11.7 | 38.5 | 33 | 41 |
22691H 90° BSP FEMALE 60° CONE
BSPP standard thread;
Female connection port;
60° Cone Seat Seal;
90° body elbow;
Zinc-plated carbon steel; stainless steel available;
Swaged fitting nipple combined with the corresponding ferrule which is crimped on the end of the hydraulic hose.
Note:
The last number in the five item code: “1” stands for use with braided hoses; “2” stands for use with spiral hoses; e.g 22691 for braid; 22692 for spiral;
Item code with “T” means T-type thread nut, comparing to locked thread nut, T-type can be extracted out from the mandrel;
| PART NO. | THREAD E | HOSE BORE | DIMENSIONS | ||||
|---|---|---|---|---|---|---|---|
| DN | DASH | A | C | H | S2 | ||
| 22691-04-04(H62) | G1/4"x19 | 6 | 04 | 30 | 5.5 | 62 | 19 |
| 22691-06-06(H77.5) | G3/8"x19 | 10 | 06 | 35.3 | 6.3 | 77.5 | 22 |
| 22691-08-08(H84) | G1/2"x14 | 12 | 08 | 41 | 7.5 | 84 | 27 |
| 22691-10-10(H114) | G5/8"x14 | 16 | 10 | 56.5 | 9.5 | 114 | 30 |
| 22691-12-12(H137) | G3/4"x14 | 20 | 12 | 65.5 | 10.9 | 137 | 32 |
| 22691-16-16(H140.5) | G1"x11 | 25 | 16 | 76.7 | 11.7 | 140.5 | 41 |
Related Products
Swaged Metric Multiseal Fittings
swaged metric multiseal fitting has a hemisphere interface on the female hydraulic fitting, and the chamfer face on the inside of a male thread. it has a metric thread.
Swaged Metric 60° Cone Seal Fittings
Swaged metric 60° cone seal fitting has a 60° cone seat on the female hydraulic fitting, and a 60° chamfer on the mated male fitting, it has metric thread, swage tail.
Swaged Metric 74° Cone Seal Fittings
Swaged metric 74° cone seal fittings has a 74° Concave cone seat on the female fitting, and a 74° convex cone nose on the male fitting, swaged tail and metric thread.
Swaged Metric 24° Cone O-Ring Seal L.T. Fittings
Swaged metric 24° cone o-ring seal L.T. fittings has a 24° cone seat on the female fitting and an o-ring seal on the cone interface, the mated male fitting has a 24° chamfer.
Swaged Metric 24° Cone O-Ring Seal H.T. Fittings
swaged metric 24° cone o-ring seal H.T. fittings have 24° cone o-ring seat on the female fitting which match with 24° chamfer seal male fittings for high pressure
Swaged Metric Standpipe Straight Fittings
Swaged metric standpipe straight fittings have staight standpipe on the connection port, they can be connected with Clamp Nuts and ring seal.